Composite fence panel kit for a 6ft section. Comes with one post – end kit will be required.
Select your required post & rail colour, board colour and fixing requirements below.
This full panel kit contains everything you need to build a run of fence panels where the posts are being concreted in to the ground. Each kit comes with one single post so you can daisy chain them together. You will need an ‘end kit’ to complete the run of panels, these are sold separately.
The composite posts are 2.4m high which allows for concreting at a recommended depth of 600mm when setting the fence panels at 6ft. Alternatively, you can choose to bolt the posts down using the steel post mounts – select the ‘bolt down’ option for this.
Please be aware, the boards will need to be trimmed by approx 5 inches to suit the length of the aluminium rails.
Kit Includes:
- 12 x Composite boards (select your choice of colour)
- 1 x Composite universal 2.4m post
- 1 x Post cap and Base cover set
- 1 x Black top rail – 36 x 22.8 x 1750mm
- 1 x Black bottom rail – 50 x 20 x 1750mm
- 2 x L bracket for top rail
- 2 x L bracket for bottom rail
The bolt down kit also includes:
- 1 x Steel post mount
- Anchor bolts
