Slatted Cladding Wall Panel – Golden S1

Maintenance and hassle free, our composite wall cladding boards are a fast way to spruce up your outdoor and indoor spaces!

This simple wall cladding system makes installation so straight forward that any project can be undertaken quickly. You first need to install battens to the area to be cladded (one metre apart will suffice), then screw the starter clips at the base of the battens. The first cladding board sits in to the clip to secure in to place. The board then need screwing in through the edge which is hidden when you position your next board in to place.

The cladding can be installed horizontally or vertically, depending on your preference.

We do advise that you pilot drill the boards prior to screwing in to the battens.

To finish your corners, we sell matching L Trims which can be fixed easily with either screws or invisibly using a bonding agent such as CT1.

In addition to the boards themselves, you will need starter clips for the bottom row of cladding and screws for the rest. These are available separately.

Board Dimensions:

3.6m long, 200mm wide (when joined together), 220mm wide (overall), 26mm deep

OR

2.5m long, 200mm wide (when joined together), 220mm wide (overall), 26mm deep

Once your project makeover is complete, you can be confident that it will remain looking amazing for years to come.